SOLICITATION NOTICE
34 -- 34-Metalworking Machinery
- Notice Date
- 6/12/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Contracting Office, Marine Corps Air Station, PSC 561 Box 1872, FPO AP 96310-0029
- ZIP Code
- 96310-0029
- Solicitation Number
- M6261303T0189
- Response Due
- 6/30/2003
- Archive Date
- 7/30/2003
- Point of Contact
- Jiro Maekawa 011-81-6117-53-6142 Jiro Maekawa, Contract Specialist, Phone 011-81-6117-53-6142, Fax 011-81-6117-53-4594. (e-mail is preferred.)
- Description
- 1. DESCRIPTION: This is a combined synopsis/solicitation on a ?Brand Name or Equal? basis for commercial items prepared in accordance with the format in Subpart 12.6, as supplemented with additional information included in this notice. This procurement is not a small business set-aside; any responsible source may submit an offer. This announcement constitutes the only solicitation; a quote is being requested and a written solicitation will not be issued. Solicitation M62613-03-T-0189 is issued as a request for quote and incorporates the provisions and clauses in effect through Federal Acquisition Circular 01-09. The agency?s need is for 1.1 Item 0001: Qty: 1 ea LATHE to fabricate tools and metal parts in support of flight operations, Mfr: Southwestern Industries, Inc. - P/N: TRL1745S, 1.1.1 Salient Characteristics: The item in this solicitation is iden tified as "brand name or equal": Manufacturer: Southwestern Industries; Model number TRAK TRL 1745S. The salient physical, functional, or performance characteristics that "equal " products must meet are as follows: 1.1.2 In operation, the lathe shall be "user friendly". 1.1.3 The lathe shall be able to fabricate tools such as a box-end wrench. 1.1.4 The lathe shall be able to fabricate metal parts such as bolts, screws, washers, spacer plates, and leveling blocks. 1.1.5 The lathe shall have Computer Numerically Controlled (CNC) capability. This enables the operator to set the machine to fabricate a quantity of the same part. With the CNC capability, the operator shall be able to make more precise cuts and repetitive cuts without undue worry about operator error. Programs may be implemented into the machine to do exact layouts for production work and for jobs that re quire zero tolerances. 1.1.6 The lathe shall have the capability of doing manual engine lathing when necessary. 1.1.7 The bed swing shall be at least 14 inches. The cross slide travel shall be at least 8 inches. Spindle speeds: The lathe shall have a minimum of 12 spindle speeds. The maximum spindle speed shall be at least 2200RPM. 1.1.8 Power requirement: The operator's facility has this power capability: 220 volts or 440 volts. 2. SUBMITTALS: (1) One warranty in writing for ?Standard period?. (2) One of each: Operation and Installation manual 3. SHIPPING - F.O.B Destination, The destination is Defense Distribution Center San Joaquin in Tracy, CA 4. Delivery Date: Desired Delivery Date is 14 days after date of order. 5. INSTALLATION ? The contractor shall provide telephonic support (if necessary) to accomplish installation. 6. The contractor shall provide a standard commercial warranty. The contractor shall submit the text of the warranty with quote. The following FAR/DFARS provisions and clauses apply to this acquisition: 52.211-6, 52.212-1, 52.212-3, 52.212-4, 52.212-5 Deviation, 252.212-7001. FAR/DFARS provisions and clauses can be located at the following site: http://www.arnet.gov/far. The following clauses of DFARS 52.212-7001(b) and (c) apply: 252.225-7001, 252.225-7012, 252.225-7015, 252.227-7037. A completed copy of the following must be included with the quote: FAR 52.212-3, DFARS 252.212-7000 and DFARS 252.225-7000, 252.225-7006, 252.225-7020, 252.225-7035. The following clauses also apply: DFARS 252.204-7004, Required Central Contractor Registration. Quote is due on 30 Jun 2003 3:00 PM Japan time and may be faxed to 011-81-6117-53-4594(Attn: Jiro Maekawa, Code 4PUR) or mailed to the address above, or sent via e-mail to: maekawaj@iwakuni.usmc.mil.(e-mail is preferred). 7. Evaluation Factor: Award will be made to the quoter with the lowest priced and technically acceptable quote. 8. Points of Contact Jiro Maekawa, Contract Specialist, Phone 011-81-6117-53-6142, Fax 011-81-6117-53-4594, Email: maekawaj@iwakuni.usmc.mil(e-mail is preferred) - GySgt C. Scott, Procurement Chief, Phone 011-81-6117-53-6487, Fax 011-81-6117-53-4594, Email: scottcr@iwakuni.usmc.mil. 9. CAUTION: Because this solicitation will be issued electronically as will any amendments thereto, the Government is unable to maintain a bidders? mailing list. It is therefore incumbent upon any interested parties to periodically access the above internet address in order to obtain any amendments which may be issued. Failure to obtain any said amendments and to respond to them prior to the date and time set for receipt of offerors may render your offer nonresponsive and result in the rejections of same. All responsible sources may submit an offer which shall be considered.
- Record
- SN00346276-W 20030614/030612214618 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |