MODIFICATION
81 -- REUSABLE SHIPPING CASES
- Notice Date
- 5/20/2003
- Notice Type
- Modification
- Contracting Office
- DHS - Direct Reports, United States Secret Service (USSS), Procurement Division, 950 H Street, NW, Suite 6700, Washington, DC, 20223
- ZIP Code
- 20223
- Solicitation Number
- RFQ03Q0029
- Response Due
- 5/27/2003
- Archive Date
- 5/28/2003
- Point of Contact
- Kelly Curtin, Contract Specialist, Phone 202/406-6940, Fax 202/406-6801,
- E-Mail Address
-
kcurtin@usss.treas.gov
- Description
- Amendment No. 0002 to Request for Quotation (RFQ) Number RFQ03Q0029 is issued in order to respond to questions received regarding the requirement, establish a site visit for all vendors interested in responding to this RFQ, and to extend the due date for receipt of quotations. The following questions were received: Question 1: For Line Item Nos. 0004, 0005, 0007 through 0009, a lockable clasp was requested. To our knowledge, this is not one of the Hardigg Storm Case Standards. Please define your request. U.S. Secret Service (USSS) Response: The specification is revised in order to remove 'Lockable Clasp' and to insert 'molded in pad lockable hasp.' Question 2: For Line Item No. 0004, IM2100 Storm Case does not come with wheels or extended handle. Please advise. Note: Any additional holes in Storm Case will violate lifetime warranty and affect airtight with breather valve. USSS Response: This statement is correct. The IM2100 Storm case does not come with wheels or extended handle. The specification is revised in order to remove the wheels and extended handle from this Line Item. Question 3: For Line Item Nos. 0001, 0002 and 0003, please provide the type of foam and the number of cavities for the Foam Insert Modification. USSS Response: For Line Item No. 0001, there is a modification to the customer supplied foam insert. For Line Item Nos. 0002 and 0003, there is a custom designed insert for the customer?s equipment. Offerors will be required to attend a site visit scheduled on Friday, May 23rd, 2003 from 10:00 a.m. through 12:00 noon. The equipment to be housed in the cases will be made available in order to allow offerors to take measurements, etc. in order to ensure correct design. Question 4: For Line Item No. 0004, the IM2100 Custom Kits, please define the Custom Kits. First, does it refer to foam insert modification? Second, what type of foam is required? Third, what is the number of cavities? USSS Response: This line item requires a IM2100 case with a foam insert, as well as a custom nylon case to hold the customer?s equipment. Offerors will be required to attend a site visit scheduled on Friday, May 23rd, 2003 from 10:00 a.m. through 12:00 noon. The equipment to be housed in the cases will be made available in order to allow offerors to take measurements, etc. in order to ensure correct design. Question 5: For Line Item Nos. 0004 and 0009, pertaining to the custom black nylon padded camera case: a) What is the full specification of the camera case; b) Is there a modified foam insert; c) If includes foam insert, what type of foam; and d) What is the number of cavities? USSS Response: a) The specification remains as a custom black nylon padded case; b) The foam is stated 'pull foam'; c/d) Offerors will be required to attend a site visit scheduled on Friday, May 23rd, 2003 from 10:00 a.m. through 12:00 noon. The equipment to be housed in the cases will be made available in order to allow offerors to take measurements, etc. in order to ensure correct design. Question 6: For Line Item No. 0006, USSS requested a Storm Case specifications for AL1616-1004 case ? this is not a Storm Case. USSS Response: The specification for Line Item No. 0006 is modified to provide as follows: 'Hardigg AL1616-1004, black case color, hinge lid, airtight with breather valve, lockable cable hasp, foam lining, interior dimensions: 16 in. x16 in. x 14 in.' Question 7: What are the specifications and dimensions on the foam inserts for the cases? USSS Response: Offerors will be required to attend a site visit scheduled on Friday, May 23rd, 2003 from 10:00 a.m. through 12:00 noon. The equipment will be made available in order to allow offerors to take measurements, etc. in order to ensure correct design. Offerors interested in submitting a quotation will be required to attend a site visit scheduled on Friday, May 23rd, 2003 from 10:00 a.m. through 12:00 noon. The equipment to be housed in the cases will be made available in order to allow offerors to take measurements, etc. in order to ensure correct design. The site visit will be held in Landover, MD. Please call Kelly Curtin (202.406.6795) in order to obtain directions to the site, as well as to register for attendance to the site visit. The due date for receipt of quotations has been extended to Tuesday, May 27th, 4:00 P.M. (EST). All other terms and conditions of the original RFQ remain constant. All responsible offerors shall forward quotation package to USSS via facsimile at 202.406.6801 (Attn: Kelly Curtin). Quotation package must be received no later than 4:00 P.M. (EST), Tuesday, May 27, 2003.
- Record
- SN00327312-W 20030522/030520213058 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |