SOLICITATION NOTICE
16 -- Purchase KC-135 AIRCRAFT SEAT CUSHIONS
- Notice Date
- 1/22/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Air Force, Air Mobility Command, 319 CONS, 575 Tuskegee Airmen Blvd, Building 418, Grand Forks AFB, ND, 58205
- ZIP Code
- 58205
- Solicitation Number
- F32605-03-Q0007
- Archive Date
- 2/18/2003
- Point of Contact
- Queen McCartney, Contract Specialist, Phone (701) 747-5287, Fax (701) 747-4215, - Duane Mann, Chief, Construction Flight, Phone 701-747-5266, Fax 701-747-4215,
- E-Mail Address
-
queen.mccartney@grandforks.af.mil, Duane.Mann@grandforks.af.mil
- Small Business Set-Aside
- Total Small Business
- Description
- This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR 12.6, as supplemented with the additional information included in this notice. Only those offerors that have been certified and approved by OC-ALC/LCRM, Tinker AFB OK and 311th Human Systems Wing (AFMC) Brooks AFB, TX may submit an offer for these items. F32605-03-Q0007 is being issued as a Request for Quotation. This acquisition is set-aside for small business under North American Industry Classification System code 336350. Seat cushions are contoured for natural spinal alignment, increasing the spine's compressive load capability and enhancing crew survivability in the event of aircraft impact. Seat cushions are constructed with energy absorbing, visco-elastic, aqueous foam that provides attenuation of impact forces. Foam material shall allow a ball rebound of less than .5 inches when struck by a 6-ounce ball dropped from a height of 23 inches and exhibit a recovery rate of no less than 2.5 minutes after 80% compression for 2 hours. Foam material shall react to body temperature, allowing uniform pressure distribution across the seating area. Seat cushions will provide flotation capability in accordance with FAA TSO-C72C. All materials used in the construction of the seat cushions meet flammability requirements in accordance with FAA Regulations for Transport Category Aircraft, Paragraph 25.853(b) and Appendix F, Part 1. The energy absorbing visco-elastic, aqueous foam is protected against abrasion. The upholstery fabric exhibits no significant wear or piling when subjected to 100,000 8 Deck rubs via the Wyzenbeck method. The fabric shall pass 250 hours of carbon arc exposure without significant color changes per ASTMG23-81. Fabric shall exhibit minimum burst strength of 275 PSI per Federal Standard 191A-5122. The fabric is protected from abrasion source where necessary. Seat cushions exhibit a guaranteed life expectancy of no less than two years under normal use. All materials delivery shall be FOB Destination to 319ARW/AMXS, 3rd Ave, Bldg 522, Grand Forks AFB, ND 58205. ITEM NO ITEMS QUANTITY 100 KC-135, Pilot Cushion Set w/Cobalt Blue, Trevera Polyester Upholstery & Gray Wool Part Number 341350PC 53 EA 101 KC-135, Copilot Cushion Set w/Cobalt Blue, Trevera Polyester Upholstery & Gray Wool Part Number 341350PC 53 EA 102 KC-135, Navigator Cushion Set w/Cobalt Blue, Trevera Polyester Upholstery & Gray Wool Part Number 341350NB 53 EA 103 KC-135, Boom Cushion Set w/Cobalt Blue, Trevera Polyester Upholstery & Gray Wool Part Number 341350NB 53 EA 104 KC-135, Sliding Instructor Pilot Seat Cushion Set w/Cobalt Blue, Trevera 4 EA 105 KC-135, IP Folding Jump seat w/Cobalt Blue, Trevera Polyester Upholstery Fabric Upholstery Part Number 301350J 49 EA 106 Boom Operator Couch w/Cobalt Blue Trevera Polyester Fabric Upholstery (3 Pieces, Part Number 301350BS 53 EA 107 Chin Rest w/Cobalt Blue Cover Part Number 301350CR 53 EA 108 KC-135 Headrest w/Cobalt Blue Cover, Part Number 31135 212 EA 109 Pilot & Copilot Left Armrest w/Cobalt Blue Cover Part number 106 EA 110 Pilot & Copilot Right Armrest w/Cobalt Blue Cover Part Number 32134 106 EA 111 Boomer Left Arm Rest w/Cobalt Blue Cover, Part Number 331350 53EA 112 Boomer Right Arm Rest w/Cobalt Blue Cover, Part Number 321350 53EA 113 Include ***319ARW*** Embroidery on backs and bottoms of All cushions covers (to include the instructor Pilot Jump Seat) Lettering size: 1-1/2 inches, Block Style. The following clauses and provisions are incorporated and in effect through Federal Acquisition Circular 2001-11, applicable FAR and DFARS clauses are 52.212-1,Instruction to Offerors Commercial Items, 52.212-2,Evaluation ? Commercial Items, 52.212-4, Contract Terms and Conditions ? Commercial Items, 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders- Commercial Items, 52-232-33, Payment by Electronic Funds Transfer Central Contractor Registration, 252.212-7000 and 252.212-7001. Offerors are advised to include a completed copy of the provision at 52.212-3, Offeror Representative and Certifications Commercial Items, with its offer. Evaluation of offers shall be based on the contractor being certified and approved by OC-ALC/LCR, Tinker AFB, OK and 311th Human Systems Wing (AFMC) Brooks AFB, TX and price. The contractor must include a standard commercial warranty. Clauses and provisions are located at http://farsite.hill.af.mil. Offers may be e-mailed to Queen.McCartney@grandforks.af.mil or faxed to 701-747-4215, ATTN: Queen E. McCartney. Offers are due 10 Feb 03.
- Place of Performance
- Address: 319CONS/LGCB, 575 TUSKEGEE AIRMAN BLVD, GRAND FORKS AFB, ND
- Zip Code: 58205-6436
- Country: USA
- Zip Code: 58205-6436
- Record
- SN00244652-W 20030124/030122213539 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |