SOLICITATION NOTICE
72 -- Mat, Floor, Standing
- Notice Date
- 1/14/2003
- Notice Type
- Solicitation Notice
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), General Products Center (7FX), 819 Taylor Street Room 6A24, Fort Worth, TX, 76102
- ZIP Code
- 76102
- Solicitation Number
- 7FLA-G6-03-2096-SQ
- Archive Date
- 12/31/2003
- Point of Contact
- Gay Kirkpatrick, Contracting Officer, Phone (817)978-3672, Fax (817)978-3761,
- E-Mail Address
-
gay.kirkpatrick@gsa.gov
- Description
- 7220-00-292-2096 MAT, FLOOR, STANDING (ANTI-FATIGUE): Shall be in accordance with Military Specification MIL-M-910F dated August 9, 1991 with the following characteristics: Width - 30.0 inches Length - 36.0 inches Color - black OPTIONAL REQUIREMENT: Rubber mats shall contain 75 to 100 percent postconsumer content and 85 to 100 percent recovered materials; Plastic mats shall contain 10 to 100 percent postconsumer content and 100 percent recovered materials as specified by the EPA Comprehensive Guideline for Procurement of Products Containing Recovered Materials; Recovered Materials Advisory Notice III; Final Rule (40 CFR Part 47), Federal Register/ Vol. 65, N0. 12/Wednesday, January 19, 2000/Rules and Regulations. EXCEPTION TO SPECIFICATION: Table 1, column 2: for "compression set, percent, (max.)", line 2 delete "66" and substitute "70". PRODUCT CONFORMANCE: The products provided shall meet the salient characteristics of this Item Purchase Description, conform to the producer's own drawings, specifications, standards, and quality assurance practices, and be the same product offered for sale in the commercial market. The Government reserves the right to require proof of such conformance. PREPARATION FOR DELIVERY: The mats shall be packaged and packed in accordance with the latest revision of ASTM D 3951, Standard Practice for Commercial Packaging. Copies of ASTM standards are available from the American Society for Testing and Materials, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959. Phone: 610-832-9585, Fax: 610-832-9555, Web site: www.astm.org, e-mail: service@astm.org. PALLETIZATION: The shipping containers shall be palletized. The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double face non-reversible pallets. The palletized load shall not exceed 2500 pounds in weight. The palletized load shall not overhang the pallet and shall not exceed 53 inches in overall height. Less than half pallet loads or loads shipped by small package carrier need not be palletized. UNITIZATION OF PALLET LOAD: The palletized load shall be unitized and secured to the pallet to insure that the load arrives intact. NOTICE OF SPECIAL REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15. NOTICE: All lumber used inside or outside a shipment shall be BARK FREE. MARKING: Shipments to GSA and other civilian agencies shall be marked in accordance with FED-STD-123. Shipments to the Department of Defense (DOD) shall be marked in accordance with MIL-STD-129.
- Record
- SN00239264-W 20030116/030114214102 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |