Loren Data's SAM Daily™

fbodaily.com
Home Today's SAM Search Archives Numbered Notes CBD Archives Subscribe
FBO DAILY ISSUE OF DECEMBER 22, 2002 FBO #0385
SOURCES SOUGHT

J -- DOCKSIDE REPAIR USCGC SUNDEW (WLB 404)

Notice Date
12/20/2002
 
Notice Type
Sources Sought
 
Contracting Office
Department of Transportation, United States Coast Guard (USCG), Commanding Officer (vpl), USCG Maintenance and Logistics Command - Atlantic, 300 East Main Street Suite 600, Norfolk, VA, 23510-9102
 
ZIP Code
23510-9102
 
Solicitation Number
Reference-Number-wlb404
 
Archive Date
1/14/2003
 
Point of Contact
Mildred Anderson, Contracting Officer, Phone (757)628-4637, Fax (757)628-4675, - Michael Monahan, Supervisory Contract Specialist, Phone 757-628-4639, Fax 757-628-4676,
 
E-Mail Address
manderson@mlca.uscg.mil, mmonahan@mlca.uscg.mil
 
Description
The U.S. Coast Guard is considering whether or not to set aside an acquisition for HUBZone concerns only. The estimated value of this procurement is between $100,000.00 and $500,000.00. The small business size standard is less than 1,000 employees. The acquisition is to perform dockside repairs to the USCGC SUNDEW (WLB 404). The cutter is a 180 FOOT CLASS SEAGOING BUOY TENDER. The home pier of the cutter is 1201 Minnesota Ave, Duluth, MN 55802-2492. The cutter is geographically restricted to the Great Lakes Area. The performance period is for thirty-five (35) calendar days and is expected to begin on or about 26 May 2003 and end on or about 30 June 2003. The scope of the acquisition is for the overhauling, cleaning, inspecting, and renewing of various items aboard the USCGC SUNDEW (WLB 404). This work includes, but is not limited to: 1) clean sewage and grey water collection and holding tanks, 2) inspect and test relief valves, 3) inspect, overhaul, and test weight handling equipment, 4) inspect and test air receivers and relief valves, 5) overhaul steering gear motor, 6) overhaul warping winch assembly, and 7) overhaul anchor windlass assembly. All welding and brazing shall be accomplished only by trained welders, who have been certified by the applicable regulatory code performance qualification procedures. At the present time, the acquisition is expected to be issued under full and open competition procedures. However, in accordance with FAR 19.1305, if your firm is HUBZone certified and intends to submit an offer on this acquisition, please respond by e-mail to manderson@mlca.uscg.mil by fax at (757) 628-4676. Questions may be referred to Mildred A. Anderson at (757) 628-4637. In your response please include: (a) a positive statement of your intention to submit a bid for this solicitation as a prime contractor; (b) evidence of experience in work similar in type and scope to include contract numbers, project titles, dollar amounts, points of contact and telephone numbers; (c) past performance references with points of contact and telephone numbers. At least two references are requested, but more are desirable. Your response is required by December 30, 2002. All of the above must be submitted in sufficient detail for a decision to be made on a HUBZone set aside. Failure to submit all information requested may result in an unrestricted acquisition. A decision on whether this will be pursued as a HUBZone small business set aside or on an unrestricted basis will be posted on FedBizOpps.
 
Record
SN00228079-W 20021222/021220213643 (fbodaily.com)
 
Source
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)

FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |
ECGrid: EDI VAN Interconnect ECGridOS: EDI Web Services Interconnect API Government Data Publications CBDDisk Subscribers
 Privacy Policy  Jenny in Wanderland!  © 1994-2024, Loren Data Corp.