SPECIAL NOTICE
80 -- adhesive-coated teflon tape
- Notice Date
- 12/18/2002
- Notice Type
- Special Notice
- Contracting Office
- General Services Administration, Federal Supply Service (FSS), GSA Hardware SuperStore (6FE), 1500 East Bannister Road, Kansas City, MO, 64131
- ZIP Code
- 64131
- Solicitation Number
- Reference-Number-MPN-F-RS492-3
- Archive Date
- 1/10/2003
- Point of Contact
- Dixie Logsdon, Contractor, Phone 816-823-1713, Fax 816-823-2136, - Dixie Logsdon, Contractor, Phone 816-823-1713, Fax 816-823-2136,
- E-Mail Address
-
dixie.logsdon@gsa.gov, dixie.logsdon@gsa.gov
- Description
- NSN: 8030-01-463-6459 / UI: RO / 6 ORDERS / QUANTITIES: 3, 7, 1, 3, 3, 3 / Sealing compound, adhesive-coated teflon tape: In accordance with SAE specification AMS 3255 dated December 1995, an expanded fuel-, oil-, and water-resistant polytetrafluoroethylene tape with acrylic adhesive for gasketing and sealing aircraft access panels and other gasketing applications. Exception to specification: Change title of Table 3, page 5 to read: "TABLE 3 - Continuous Non-Ribbed Sealing Tape, Sizes and Tolerances". Class 2: continuous, nonribbed Adhesive width: 1.34 in (34 mm) Size, exception to specification: The product shall be furnished as a roll of tape 1.42 inch wide and 100 feet long on a release paper backing and packaged in accordance with the supplier's normal commercial practice provided that there will be no interaction chemically or physically with the contents so as to damage the container or alter the strength, quality, or purity of the contents during shipment handling, storage, and redistribution. The packaging shall be closed in a manner that will insure that the contents will not spill or leak from the container during shipment, handling, storage, and redistribution. Shelf life code: 6 (2 years) Maximum age on delivery: 3 months ITEM MARKING: Each item shall be marked with the following: (1) lot or batch number (2) manufacturer's name and part number(s) (3) dates of manufacture and reinspection (4) instructions for use and storage (5) markings required by specification, if applicable PACKAGING: INTERMEDIATE PACKAGING: Not more than 25 units packaged as specified above shall be further packaged in a close-fitting, corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification (200 minimum burst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. PACKAGING: Intermediate packaged boxes shall be packed in a close-fitting, corrugated fiberboard box conforming to Section 6(a), Rule 41 of the Uniform Freight Classification and Item 222 of the National Motor Freight Classification (200 minimum burst). Closure of the boxes shall be in accordance with Section 7 of Rule 41 of the Uniform Freight Classification. MARKING: All unit, intermediate, transport packages and unit loads shall be marked for delivery to civilian activities in accordance with the FED-STD-123G, dated June 6, 1997, or marked for delivery to military activities in accordance with MIL-STD-129N, dated 15, May, 1997, as applicable. PALLETIZATION: Pallet Configuration: The pallets shall be 48-inch length x 40-inch width, general purpose, four-way entry, flush stringer, double-face non-reversible pallets. Pallet lumber used shall be bark free. Pallet Load Size: The load plus the pallet shall have a maximum height of 53 inches and shall not exceed 2500 pounds in weight. Pallet Load Configuration: The containers or items shall be placed in a suitable pattern to form a stable and balanced load. Palletized loads shall be secured to the pallet to insure that the load arrives intact. Stacking Strength: The pallet plus the load shall be capable of supporting three additional like loads without any product damage and without the load or the pallet collapsing. Vertical, horizontal, or filler reinforcement may be added as necessary to provide strength. Partial Palletized Loads: Less than one-half pallet loads shall not be used for stacking, unless load is balanced on pallet. The partial palletized load shall be used for top loading only. NOTICE OF REQUIREMENTS FOR SHIPMENT TO EUROPEAN UNION COUNTRIES: Per Clause D-FSS-468, non-manufactured wood pallets and other non-manufactured wood package material used in shipments destined for ultimate delivery to or through a European Union (EU) country shall comply with the Emergency Measures (2001/219/EC) adopted by the Commission of the European Communities (CEC). Additionally, shipments delivered to DoD distribution facilities or freight consolidation points for eventual delivery to or through EU countries shall comply with DLA PROCLTR 01-15. ALL BIDS MUST BE SENT TO DIXIE LOGSDON AT ONE OF THE CONTACTS LISTED BELOW BY COB 12-26-02. PLEASE INCLUDE A COPY OF THE MATERIAL SAFETY DATA SHEET WITH YOUR BID....THANK YOU!
- Record
- SN00226224-W 20021220/021218213717 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |