SOLICITATION NOTICE
10 -- Accessories, Delivery, and Installation of Powder Gun
- Notice Date
- 11/18/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- NAVSURFWARCEN Dahlgren Division, 17320 Dahlgren Road, Dahlgren, VA 22448-5100
- ZIP Code
- 22448-5100
- Solicitation Number
- N0017803Q1004
- Archive Date
- 2/7/2003
- Point of Contact
- XDS11E (540) 653-7478
- Description
- The Naval Surface Warfare Center, Dahlgren Division (NSWCDD) intends to purchase on a sole source basis accessories, delivery, and installation of a 40 mm high performance smooth bore powder gun from Physics Applications, Inc.(PAI), 7635 Wilmington Pike, Dayton, OH 45458. The North American Industry Classification System code is 541618. The contract will be a firm fixed priced contract. FOB Destination shall apply. The Request for Quote number is N00178-03-Q-1004. DESCRIPTION: 1. Breech Assembly for 40mm Powder Gun. Includes one Long Spit Tube and one Breech Plate (for long spit tube) (QTY. 2). 2. Breech Assembly for 40mm Powder Gun. Includes one Short Spit Tube and one Breech Plate (for short spit tube) (QTY. 2) 3. Add a second Side Tank Port directly opposite the orignal port in the blast tank for the 40mm powder gun. Both side ports will be closed with hinge d doors that are sealed with o-ring seals (QTY. 1). 4. Add 23 inches I.D. Port to blast tank for the 40mm powder gun. The port will be closed with a blind flange sealed with an o-ring. The port will be located on the side of the blast tank near its downrange end (QTY. 1). 5.Modifications to blast tank for 40mm powder gun to allow the future addition of a muzzle impact tank and a debris tank assembly for planar impact experiments(QTY 1). 6.Shipping of 40mm Powder Gun System to NSWCDD (Ref. Contract No. N00178-02-M-1067). 7. On-site Installation and Demonstration, and Instruction on Proper Operation of 40mm Powder Gun System. PAI will send an engineer to NSWCDD to install, demonstrate, and instruct NSWC personnel on the proper operation of the gun system. NSWCDD will be responsible for point locating all components in the appropriate gun bay per PA I?s instructions. 8. 44mm diameter X 76mm long 4-piece serrated sabot made from 30 percent glass-filled Ultem (QTY 75). The Naval Surface Warfare Center, Dahlgren Division, Dahlgren Laboratory Procurement Division has implemented Electronic Commerce (EC) in the acquisition area; therefore, this synopsis and any applicable amendments will be available on the World Wide Web at http://www.nswc.navy.mil/supply. DoD will no longer award contracts to contractors not registered in the Central Contractors Registration (CCR) database. Registration may be accomplished by accessing the CCR Web site at http://www.ccr.gov. A paper registration form may be obtained for the DoD Electronic Commerce Information Center at 1-888-227-2423.
- Record
- SN00206785-W 20021120/021118213410 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |