SOLICITATION NOTICE
36 -- CONICAL TWIN SCREW EXTRUDER, MARK II, MODEL CTSE-V 32MM, 1 EA. AND ACCESSORIES
- Notice Date
- 5/16/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- NASA/John F. Kennedy Space Center, Procurement, Kennedy Space Center, FL 32899
- ZIP Code
- 32899
- Solicitation Number
- PR-2128-4758
- Response Due
- 5/23/2002
- Archive Date
- 5/16/2003
- Point of Contact
- Barbara Y. Powell, Contract Specialist, Phone (321) 867-7384, Fax (321) 867-2825, Email Barbara.Powell-1@ksc.nasa.gov
- E-Mail Address
-
Email your questions to Barbara Y. Powell
(Barbara.Powell-1@ksc.nasa.gov)
- Description
- NASA/KSC plans to issue a Request for Quotation (RFQ) for Extruder, conical twin screw extruder, Mark II, Model CTSE-V 32MM, 13:1 L/D ratuim screw ritatuinL /ciyter ritatungm barrek cinstryctuinL 416 SS Nitrided. Electrically heated with 3 zone ceramic band heaters on barrel, up to 400 degrees C, barrel drilled for air cooling, water cooled feed throat, supplied with vent assembly for venting or non-venting extrusion. (1) Rupture safety plug (Catalog #05-00-240) with inconel disc rated for 9400 PSIG @ 150 degrees C (302 degrees F) pressure release, (4) Control thermocouple assemblies. Including gravity feed hopper. Threaded ring at end of barrel for easy attachment of Brabender dies, including air cooling kit and hoses without screws. Power requirement: 230 VAC, 14 AMP, 60 HZ single phase, 1 ea. 2. Pair of counter-rotating conical twin venting (403) extruder screws, Mark II, 1 ea; 3. Horizontal rod die assembly - interchangeable type. Construction 303 SS. Complete with 500 W Band heater, stock temperature thermocouple and ring nut. Power requirement: 230 VAC, 2.2 AMP, 60 HZ, Single phase, 1 ea. 4. Interchangeable rod die nozzle, L/D=3:1, 416 stainless, 1/8" I.D., 1 ea. 5. Totally closed, flush diaphragm combined temperature thermocouple, and pressure transducer, with connectors for simultaneous pressure and temperature recording, standard pressure range: 0-10,000 PSIG (Specify pressure range required), 1/2" x 20 threaded adapter probe TSM/extruder, 1 ea.; 5. Cleaning kit consisting of: 01-00-073-Brass Spatula 02-00-107-hand brush 25-00-232-brass brush for barrel 25-00-236-brush handle, 1 ea. This procurement is being conducted under the Simplified Acquisition Procedures (SAP). NASA/KSC intends to purchase the items from C. W. Brabender, 50 E. Wesley St., P. O. Box 2127, South Hackensack, NJ 07606, under the authority 10 U.S.C. 2304 (c)(1) or 41 U.S.C, 253(c)(1), as the "only one responsible source and no other supplies or services will satisfy agency requirement". The Government intends to acquire a commercial item using FAR Part 12. Interested organizations may submit their capabilities and qualifications to perform the effort in writing to the identified point of contact not later than 4:30 p.m. local time on 05/23/2002. Such capabilities/qualifications will be evaluated solely for the purpose of determining whether or not to conduct this procurement on a competitive basis. A determination by the Government not to compete this proposed effort on a full and open competition basis, based upon responses to this notice is solely within the discretion of the government. Oral communications are not acceptable in response to this notice. All responsible sources may submit an offer which shall be considered by the agency. OMBUDSMAN STATEMENT REQUIRED] An Ombudsman has been appointed. See NASA Specific Note "B". Any referenced notes can be viewed at the following URL: http://genesis.gsfc.nasa.gov/nasanote.html
- Web Link
-
Click here for the latest information about this notice
(http://prod.nais.nasa.gov/cgi-bin/eps/bizops.cgi?gr=D&pin=76#101520)
- Record
- SN00078521-W 20020518/020516213343 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |