SOLICITATION NOTICE
66 -- Pressure gages
- Notice Date
- 4/26/2002
- Notice Type
- Solicitation Notice
- Contracting Office
- Department of the Navy, Naval Supply Systems Command, FISC Pearl Harbor, Bldg. 475-2, Code 200 1942 Gaffney Street, Suite 100, Pearl Harbor, HI, 96860-4549
- ZIP Code
- 96860-4549
- Solicitation Number
- N00604-02-T-A719
- Response Due
- 5/3/2002
- Archive Date
- 5/18/2002
- Point of Contact
- Mary Wardwell, Contract Specialist, Phone 808-474-4100, Fax 808-474-5223,
- E-Mail Address
-
mary_k_wardwell@pearl.fisc.navy.mil
- Description
- This solicitation is issued on an unrestricted basis. This is a combined synopsis/solicitation for commercial items prepared in accordance with the format in FAR Subpart 12.6, Streamline Procedures for Evaluation and Solicitation for Commercial Items, as supplemented with additional information included in this notice. This announcement constitutes the only solicitation; proposals are being requested and a separate written solicitation will not be issued. Request for Quotation number N00604-02-T-A719 applies. This solicitation document and incorporated provisions and clauses are those in effect through Federal Acquisition Circular 2001-06 and Defense Change Notice 20020314. The NAICS code is 334513 and the business size standard is 500 employees. This requirement is for pressure gages. CLIN 0001, 6 each gauge, pressure, dial indication: Heise gage Model CM-12inch or equal; dial size 12 inch; range: 0-3000 PSI; pressure medium: air, nitrogen, water; inlet: 9/16 inch -18 F, MS33649-4; bottom-wall mount; 403 stainless steel bourdon tube; plus or minus 0.1% of full scale accuracy; 5 psig (maximum)graduation units; Type I Clean of MIL-STD-767D, MIL-STD-2041D are invoked; temperature compensated; oil free; mercury free. CLIN 0002, 6 each, gauge, pressure, dial indication: Heise gage model CM-16 inch or equal; dial size 16 inch; range: 0-3000 PSI; pressure medium: air, nitrogen, water; inlet: 9/16 inch -18 F, MS33649-4; bottom-wall mount; 403 stainless steel bourdon tube; plus or minus 0.1% of full scale accuracy; 2 PSIG (maximum) graduation units; Type I Clean of MIL-STD-767D, MIL-STD2041D are invoked; temperature compensated; oil free; mercury free. CLIN 0003, 6 each, gauge, pressure, dial indicating: Heise gage model CMM-(8-1/2in)or equal; dial size 8-1/2 inch; range: 0-3000 PSI; pressure medium: air, nitrogen, water; inlet: 9/16 inch -18 F, MS33649-4; bottom-wall mount; 403 stainless steel bourdon tube; plus or minus 0.1% of full scale accuracy; 2 PSIG (maximum) graduation units; Type I Clean of MIL-STD-767D, MIL-STD2041D are invoked; temperature compensated; oil free; mercury free. CLIN 0002, 6 each, gauge, pressure, dial indication: Heise gage model CM-16 inch or equal; dial size 16 inch; range: 0-3000 PSI; pressure medium: air, nitrogen, water; inlet: 9/16 inch -18 F, MS33649-4; bottom-wall mount; 403 stainless steel bourdon tube; plus or minus 0.1% of full scale accuracy; 2 PSIG (maximum) graduation unites; Type I Clean of MIL-STD-767D, MIL-STD2041D are invoked; temperature compensated; oil free; mercury free. CLIN 0004, 8 each, gauge, pressure, dial indicating: Heise gage model CM-12 inch or equal; dial size 12 inch; range: 0-1000 PSI; pressure medium: air, nitrogen, water; inlet: 9/16 inch -18 F, MS33649-4; bottom-wall mount; 403 stainless steel bourdon tube; plus or minus 0.1% of full scale accuracy; 1 PSIG (maximum) graduation units; Type I Clean of MIL-STD-767D, MIL-STD2041D are invoked; temperature compensated; oil free; mercury free. CLIN 0005, 4 each, Gauge, differential pressure: Range: 0-125 inch water; graduations.2in; accuracy 0.066% of full scale; dial diameter: 8-1/2 inch; 1/8 inch female NPT, vertical mount; Wallace & Tiernan part number 62A-4C-0125 Series 1500 or equal. Type I Clean of MIL-STD-767D, MIL-STD2041D are invoked Required delivery is 30 days ADC, F.O.B. Destination, Pearl Harbor, Hawaii 96860. Inspection and Acceptance shall be made at Destination by the receiving activity. In the event the unit price and extended price are ambiguous, the Government shall use the indicated unit price for evaluation and award purposes. Far 52.211-2, Availability of Specifications Listed in the DoD Index of Specifications and Standards (DoDISS) and Descriptions Listed in the Acquisition Management Systems and Data Requirements Control List, DoD 5010.12-L applies. Copies of specifications, standards, and data item descriptions cited in this solicitation may be obtained -(a) From the ASSIST database via the Internet at http://assist.daps.mil; or(b) By submitting a request to the --Department of Defense Single Stock Point (DoDSSP),Building 4, Section D, 700 Robbins Avenue, Philadelphia, PA 19111-5094,Telephone (215) 697-2667/2179,Facsimile (215) 697-1462. For CLINS 0001 - 0004, Mercury or mercury compounds shall not be intentionally added or come in direct contact with hardware or supplies furnished under this contract. Contractor shall provide certification indicating that all items furnished under this contract are free of mercury or mercury compounds. The contractor shall provide the procuring activity a certificate of compliance, which shall state "All items furnished on this contract are in full compliance with all specification and contract requirements." This statement shall be signed by a contractor official designated responsible for quality assurance. All certifications are required to be delivered with the material. Payment on material for which certifications are not received will be withheld. Partial shipments are authorized. Where certification is required, each partial shipment must be accompanied by applicable certification for that shipment. The provision at FAR 52.212-1, Instructions to Offerors-Commercial Items applies. Addendum to FAR 52.212-1: Paragraph (h), Multiple awards-Delete entire paragraph. Substitute "Single Award. The Government plans to award a single contract resulting from this solicitation. Unless otherwise provided in the Schedule, offers may not be submitted for quantities less than those specified. The Government reserves the right to make an award on any item for a quantity less than the quantity offered, at the unit prices offered unless the offeror specified otherwise in the offer." The provision at FAR 52.212-2, Evaluation?Commercial Items applies. The Government intends to make a single award to the responsible contractor whose proposal is technically acceptable, in full compliance to all other requirements set forth in the solicitation and the lowest cost or price. Technical acceptability is more important than price. The Government reserves the right to judge which quotes show the required capability and the right to eliminate from further consideration those quotes which are considered unacceptable and not capable of being made acceptable without major rewrite or revision. Offerors are required to complete and include a copy of the following provisions with their proposals (copies may be obtained from http://farsite.hill.af.mil or by request from this office): FAR 52.212-3, Offeror Representation and Certifications-Commercial Items; DFARS 252.212-7000, Offeror Representations and Certifications-Commercial Items. Also, DFARS 252.225-7035, Buy American Act and Balance of Payments Program Certificate; DFARS 252.204-7004, Required Central Contract Registration. Clause 52.212-4, Contract Terms and Conditions-Commercial Items, applies. Add the following provisions: FAR 52.215-5, Facsimile Proposals. The clause at FAR 52.212-5, Contract Terms and Conditions Required to Implement Statutes or Executive Orders-Commercial Items applies with the following applicable clauses for paragraph (b): FAR 52.222-19 FAR 52.222-21 Prohibition of Segregated Facilities; FAR 52.222-26, Equal Opportunity; FAR 52.222-35, Affirmative Action for Special Disabled and Vietnam Era Veterans; FAR 52.222-36 Affirmative Action for Workers with Disabilities; FAR 52.222-37, Employment Reports on Special Disabled and Vietnam Era Veterans; FAR 52.232-33 Payment by EFT ? CCR. FAR 52.223-3 Hazardous Material Identification and Material Safety Sheet and DFAR 252.223-7001 Hazard Warning Labels apply. DFARS 252.212-7001, Contract Terms and Conditions Required to Implement Statutes or Executive Orders Applicable to Defense Acquisitions of Commercial Items, applies with the following clauses applicable to paragraph (b): DFARS 252.227-7035 Buy American ? North American Free Trade Agreement Implementation Act ? Balance of Payment Program. Quotes must be received by the Contracting Officer no later than 1:00 p.m. HST, 03 May 2002. Quotes may be mailed, faxed or e-mailed. Quotes should be mailed to Department of Navy, Fleet and Industrial Supply Center, Regional Contracting Department (Code 201A.MW), 1942 Gaffney Street, Suite 100, Pearl Harbor, Hawaii 96860-4549. Facsimile proposals will be accepted at 808/474-5223. E-mail quotes may be addressed to Mary_K_Wardwell@pearl.fisc.navy.mil.
- Place of Performance
- Address: Pearl Harbor, Hawaii
- Zip Code: 96860
- Zip Code: 96860
- Record
- SN00067203-W 20020428/020426213345 (fbodaily.com)
- Source
-
FedBizOpps.gov Link to This Notice
(may not be valid after Archive Date)
| FSG Index | This Issue's Index | Today's FBO Daily Index Page |