Loren Data's SAM Daily™

FBO DAILY ISSUE OF JANUARY 09, 2002 FBO #0038
PRESOLICITATION NOTICE

58 -- Lease for nine(9) months with an option to buy, Single Beam Multi-Mode Scientific Sounder and related equipment.

Notice Date

1/7/2002
 

Notice Type

Presolicitation Notice
 

Contracting Office

Portland District, US Army Corps of Engineers, Contracting Division (CENWP-CT), P.O. Box 2946, Portland, OR 97208-2946
 

ZIP Code

97208-2946
 

Solicitation Number

DACW57-02-Q-0030
 

Response Due

1/14/2002
 

Archive Date

2/13/2002
 

Point of Contact

Gaylen Evans, (503) 808-4608
 

E-Mail Address

Email your questions to Portland District, US Army Corps of Engineers
(gaylen.m.evans@usace.army.mil)
 

Small Business Set-Aside

Total Small Business
 

Description

NA This is a combined synopsis/solicitation. Interested contractors are encouraged to submit a quote. Quotes shall be received only by FAX or email. You can FAX to Attn: Mr. Gaylen Evans at (503) 808-4605 or email at Gaylen.M.Evans@usace.army.mil. Pleas e submit a quote on the following items. ITEM NO QUANTITY UNIT SUPPLIES/SERVICES 0001 XXX XXX Lease (9) nine months with option to purchase Hydroacoustic equipment 0001AA 6.00 Each Single Beam Multi-Mode Scientific Sounder Single frequency, 420 kHz (other frequencies possible) Integrated 10 channel transducer multiplexer for transducers with internal pre-amplifiers Separate Sync output for each transducer Logarithmic detector receiver output Internal calibration generator, 4 levels at 20 dB per step, CW or pulse with selectable separation Signal monitor function allows monitoring received signal and dynamic data threshold simultaneously Signal blanking and range markers may be used to facilitate system setup 'Multi-Mode' computer controlled selection of receiver gain, transducer #, etc. (can be changed each ping) Note: Does not include required data acquisition card, computer or data acquisition software 0001AB 6.00 Each Data Acquisition Card 0001AC 6.00 Each Single Beam Data Acquisition/Signal Processing SW Includes sounder control data acquisition and single beam signal processing. Includes electronic echogram (color CRT during data acquisition) Includes Multi-Mode capabilities (10 single beam Modes) For use with a IBM PC/AT compatible computer - not included. Includes one-year free upgrades. 0001AD 6.00 Each Data Acquisition Computer System Includes software/data acquisition card installation and system testing/burn-in 'Pentium' 500 MHz with cooling fan, 64 Meg PC-133 RAM (or equiv.) 10 GB Hard Drive, 1.44 MB Floppy, 52X CD ROM, AGP Video, PS/2 Keyboard, PS/2 Mouse 7237 Enlight Mid Tower ATX Case W/250 Watt PS (or equiv.) 15 inch SVGA Monitor Includes IBM PC DOS operating system and Windows 98 SE (dual boot) 0001AE 8.00 Each Single Channel Deck cable, 100' Belden 8412 3 socket Female rubber underwater connector with locking sleeve on one end 3 pin Male rubber underwater connector with locking sleeve on one end 0001AF 27.00 Each Single Channel Deck cable, 250' Belden 8412 3 socket Female rubber underwater connector with locking sleeve on one end 3 pin Male rubber underwater connector with locking sleeve on one end 0001AG 54.00 Each Single Channel Deck cable, 500' Belden 8412 3 socket Female rubber underwater connector with locking sleeve on one end 3 pin Male rubber underwater connector with locking sleeve on one end 0001AH 50.00 Each Single Channel Jumper Cable, 6' Long Belden 8412 3 socket Female rubber underwater connector with locking sleeve on one end 6 pin MS connector on one end of equipment 0001AJ 33.00 Each Single-Channel Transducer Cable, Armored, Jacketed Thick Polyurethane outer jacket over One layer of stainless steel braided armor over Signal Cable for excellent strength & abrasion resistance and excellent electrical match to Belden 8412 deck cables. 3 Socket female UW connector on one end. 3 Pin male UW connector on other end. Molded polyurethane mechanical termination with 2' pigtail ends. 0001AK 23.00 Each Single Beam Transducer With Internal Pre-Amplifier 420 kHz, six degree (approx.), conical pattern Side lobes down 27 dB or more Anodized aluminum housing 4.5 inches dia by 6 inches long (approx.) Pre-amplifier contained within transducer housing greatly reduces noise pickup Standard 3-pin male underwater connector (uses standard single channel cable) Includes one system calibration Cannot be used with acoustic lens 0001AL 27.00 Each Single Beam Transducer With Internal Pre-Amplifier 420 kHz, six degree (approx.), conical pattern Side lobes down 27 dB or more Can be used with lens for greater beamwidths (side lobes will increase slightly) Anodized aluminum housing 4.5 inches dia by 6 inches long (approx.) Pre-amplifier contained within transducer housing greatly reduces noise pickup Standard 3-pin male underwater connector (uses standard single channel cable) Includes one system calibration - with or without lens 0001AM 25.00 Each Acoustic Lenses for Single Beam Transducers ( 4.5 inch dia. housing only) Increases beamwidth of Line Item No. 0001AK to 10 degrees Does not include an additional system calibration 0001AN 3.00 Each Split Beam Remote Transducer Multiplexer Four Split Beam Channels Includes Interface to Xducers With Pre-Amps External to PAS-103, Requires power from sounder or from local multiplexer Can be located as far away as 950' from PAS-103 sounder or local multiplexer (no cables included) Can be interfaced to non-PAS sounders Underwater housing 6 inches diameter by 18 inches long 19 Pin metal shell underwater connectors - requires 6 channel UW cable for signals, power & control 0001AP 4.00 Each Six-Channel Split Beam Cable For connection of sounder or local multiplexer to remote multiplexer or transducer Four Belden 8412 signal channels plus two channels for power & control signals Overall heavy polyurethane jacket MS connectors on upper end for connection to sounder or multiplexer Metal shell 19 socket UW connector molded to 'lower' end for transducer or Remote UW Mux I/O port Includes protective caps for connectors 0001AQ 9.00 Each Transducer, Split Beam, 420 kHz, With Pre-Amplifier Six degree (approx.) full beam width, circular. Side lobes down 28 dB (min). Diced Ceramic, 4 level design with matching layer for maximum stability, efficiency and bandwidth. Pre-Amplifiers derive power from the four signal cables -- no need for separate power cable Hard coat anodized aluminum housing 4.5 inches dia by 10.3 inches long (or 6 inches diameter by 7 inches long) Metal shell 19 pin connector Includes one split beam system calibration 0001AR 7.00 Each Four-Channel Transducer Cable - 235' Four Belden 8412 signal channels with overall heavy polyurethane jacket Note: For split beam transducers -- no control or power channels for multiplexers Metal shell 19 pin UW connector molded to 'upper' end for Remote UW Mux xducer port or breakout box Metal shell 19 socket UW connector molded to 'lower' end for transducer Includes protective caps for connectors 0001AS 2.00 Each Four-Channel Transducer Cable - 470' Four Belden 8412 signal channels with overall heavy polyurethane jacket Note: For split beam transducers -- no control or power channels for multiplexers Metal shell 19 pin UW connector molded to 'upper' end for Remote UW Mux xducer port or breakout box Metal shell 19 socket UW connector molded to 'lower' end for transducer Includes protective caps for connectors Delivery Hours are Monday through Friday 7:00 AM - 11:00 AM NOTE: OFFEROR'S QUOTE SHALL REFLECT 9 MONTHS OF LEASE PAYMENTS IN THE UNIT PRICES. THE O FFEROR'S QUOTE SHALL STATE THE PURCHASE PRICE OR PROVIDE A FORMULA WHICH SHOWS HOW THE PURCHASE PRICE WILL BE ESTABLISHED AT THE TIME OF PURCHASE. In order for contractors to conduct business with the Federal Goverment, the contractor must provide registration information to the Central Contractor Registration(CCR). Contractors can access the CCR website for free at http://www.ccr2000.com. This pro curement is 100% set-aside for small business concerns. The size standard for which is a concern including all affiliates, with no more than 500 employees. NAICS 334419.
 

Web Link

Army Single Face to Industry
(http://acquisition.army.mil)
 

Place of Performance

Address: Portland District, US Army Corps of Engineers Contracting Division (CENWP-CT), P.O. Box 2946 Portland OR

Zip Code: 97208-2946

Country: US
 

Record

SN20020109/00012224-020108092516 (fbodaily.com)
 

Source

FedBizOpps.gov Link to This Notice
(will not be valid after Archive Date)

---

| FSG Index  |  This Issue's Index  |  Today's FBO Daily Index Page |